All

pair of fully working LED 955 Reverse units,  you will see in photos the casing has scratching/discolour on the outer. ALL the bulbs fully work and give out the #Enhanced look still. These are sold as pairs and are none returnable and have no warranty. --- Consisting of 32 High powered LED's around the side, and 2 high power projection LED's on the end these bulbs give a fantastic projection. We give you, the #Enhanced Edition 955 LED Unit Technical Info 12v Low Power useage / High Lumen Output 5000k Ice White in colour 34 SMD's per LED

Read more less

SLIGHT QUALITY ISSUE WITH A HANDFULL ON THE LAST BATCH SO THESE ARE NOW UP FOR CLEARANCE. THE MOULD APPEARS TO HAVE BLED CAUSING LITTLE BITS OF MELTED PLASTIC ON THE CLIPS WHICH NEEDS TRIMMING OFF WITH SNIPS OR A BLADE AND THE OVERALL QUALITY IS ABOUT 20% LOWER THAN EXPECTED. THESE ARE PERFECT FOR A "DIY'ER" WHO WANTS TO HAVE A FIDDLE ON THE CHEAP. NONE RETURNABLE Ford Performance logo in Red and White as seen in the pictures! Number plate surround with Ford Performance logo can be used for front or rear of vehicle - Sold as a Pair so one for each! Add a distinctive look to your Ford with Ford Performance licence plate holders for your vehicle registration plates.

Read more less

These items are slightly marked in certain areas, each set is unique and as a result they are on clearance at 50% off - Please note, these are NONE RETURNABLE and NO WARRANTY IS PROVIDED! All items are brand new, marks may be from production or storage - There is 1 set of each, if the item shows as "Sold out" when you select it, then it has already gone SET 1: LEFT HAS SMALL BLACK MARK ON LED STRIP & SCRATCHES ON LENSE, RIGHT HAS SMALL BLACK MARK ON LED STRIP & SCRATCHES ON LENSE SET 2: LEFT HAS SMALL BLACK MARK ON LED STRIP & SCRATCHES ON LENSE, RIGHT HAS SMALL BLACK MARK ON LED STRIP & SCRATCHES ON LENSE SET 3: LEFT HAS SMALL BLACK MARK ON LED STRIP & SCRATCHES ON LENSE, RIGHT HAS SMALL BLACK MARK ON LED STRIP & SCRATCHES ON LENSE   ITEM DESCRIPTION The All new Enhanced Edition sequential indicator unit from CEUK for the MK7 Fiesta (Pre Facelift & Facelift)   A fine complement for our LED front and rear indicator offerings! Simple plug and play unit, installed by simply removing the OEM bulb and lense and replacing with our full replacement Unit! Amber sequential strobing that is completely canbus friendly!  Smoked Lense Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.  

Read more less

 FITS MK8 AND MK8.5 FIESTA / MK2 Puma These items are slightly marked in certain areas, each set is unique and as a result they are on clearance at 50% off - Please note, these are NONE RETURNABLE and NO WARRANTY IS PROVIDED! All items are brand new, marks may be from production or storage - There is 1 set of each, if the item shows as "Sold out" when you select it, then it has already gone SET 1: LEFT HAS SMALL BLACK MARK ON LED STRIP, RIGHT HAS SMALL BLACK MARK ON LED STRIP SET 2: LEFT HAS SMALL BLACK MARK ON LED STRIP, RIGHT HAS SMALL BLACK MARK ON LED STRIP SET 3: LEFT HAS SMALL BLACK MARK ON LED STRIP, RIGHT HAS SCRATCHES ON LENSE SET 4: LEFT HAS STRAIGHT SLIT MARK ON LED STRIP, RIGHT HAS SMALL BLACK MARK ON LED STRIP SET 5: LEFT HAS SMALL BLACK MARK ON LED STRIP, RIGHT HAS SMALL BLACK MARK ON LED STRIP SET 6: LEFT HAS SMALL BLACK MARK ON LED STRIP, RIGHT HAS SMALL BLACK MARK ON LED STRIP   ITEM DESCRIPTION The All new Enhanced Edition sequential indicator unit from CEUK for the MK8 Fiesta! A fine complement for our LED front and rear indicator offerings  Simple plug and play unit, installed by simply removing the OEM bulb and lense and replacing with our full replacement Unit! Amber sequential strobing that is completely canbus friendly!  Designed in house by the team at CEUK you will not find these anywhere else with as good a quality  Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Protected by British Copyright Law Intellectual Property Ownership Reference: 6085957  

Read more less

CLEARANCE ITEM- ITEMS ARE NONE RETURNABLE AD HAVE NO WARRANTY. PLEASE SEE PICTURES AS THESE ITEMS BOTH HAVE SMALL DEFECTS ON THEM.    Ford Performance logo in Red and White as seen in the pictures! Number plate surround with Ford Performance logo can be used for front or rear of vehicle - Sold as a Pair so one for each! Add a distinctive look to your Ford with Ford Performance licence plate holders for your vehicle registration plates. Best quality guaranteed!

Read more less

An Alloy Header Tank for BMW Mini 2007 onwards Cooper S Models. Hand crafted and polished in the UK making for an easy fitment and replacement. If you are unsure if this product is suitable for your application, please contact us.  FITS: R55 CLUBMAN  R56 HATCHBACK R57 CONVERTIBLE R58 COUPE R59 ROADSTER     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Bespoke Custom Design Mudflaps to fit:Hyundai i20N / N-Line Hatchback VersionDesigned and made to order here in the UK by us 'The rallyflapZ Team' *ShortieZ* - Protection without the full Rally Look! ShortieZ are our latest design, They do not stick out / hang as low as our rallyflapZ Version Mudflaps! Designed for Looks & Protection Only the Best Materials used Easy Installation Long Lasting Exceptional Flexibility Impact Resistance HYUNDAI I20N / N-LINE HATCHBACK - KIT INCLUDES:Front Fixing Kit Contents:2 x Front Mud Flaps2 x Laser-Cut Stainless Steel Brackets (Black Powder Coated) & All Fixings RequiredRear Fixing Kit Contents:2 x Rear Mud Flaps2 x Laser-Cut Stainless Steel (Black Powder Coated) & All Fixings required Avoid expensive re-sprays and get some protection now against Road Grit, Mud, Dirt & GreaseOur rallyflapZ / ShortieZ offer outstanding durability when compared to conventional OEM hard plastic or moulded Mudflaps, You can be assured that with our rallyflapZ come peace of mind that they can be exposed to the harshest weather conditions without any danger of corrosion.MATERIALS 4mm Thick PVC (Gloss) - Perfectly fine for everyday road use - High Quality with a Gloss Finish 4mm Thick PVC (Satin) - Perfectly fine for everyday road use - High Quality with a Satin / Matt-like FinishLOGO'SOur Logo's are a High quality vinyl material which is applied once the Mud Flaps have been cut to shape and sanded.The Vinyl is long lasting once applied to the mud flap material - however in the event of peeling or damage to them - we offer a life time guarantee on them!

Read more less

Bespoke Custom Design Mudflaps to fit:Ford Focus MK4 ST & ST-Line - *ESTATE Version*Designed and made to order here in the UK by us 'The rallyflapZ Team' *ShortieZ* - Protection without the full Rally Look! ShortieZ are our latest design, They do not stick out / hang as low as our rallyflapZ Version Mudflaps! Designed for looks & protection Only the Best Materials used Easy Installation Long Lasting Exceptional Flexibility Impact Resistance *** Important Notes: These shortieZ will fit the models that have the black plastic strip on the edge of the front wheel arch. Where this is fixed - when removed will become the front fixing points for the front mudflaps. If you do not  have this black plastic strip then there is nowhere for the front mudflaps to fix to unfortunately. THIS MUST BE CHECKED BEFORE PURCHASE! *** Note: If your car has 'rear side parking sensors' these will NOT fit to your car! Ford Focus MK4 ST & ST-Line (ESTATE )- KIT INCLUDES:Front Fixing Kit Contents:2 x Front Mud FlapsAll Fixings RequiredRear Fixing Kit Contents:2 x Rear Mud Flaps2 x Rear Laser Cut Stainless Steel BracketsAll Fixings required Avoid expensive re-sprays and get some protection now against Road Grit, Mud, Dirt & GreaseOur rallyflapZ / ShortieZ offer outstanding durability when compared to conventional OEM hard plastic or moulded Mudflaps, You can be assured that with our rallyflapZ come peace of mind that they can be exposed to the harshest weather conditions without any danger of corrosion.  MATERIALS 4mm Thick PVC (Gloss) - Perfectly fine for everyday road use - High Quality with a Gloss Finish 4mm Thick PVC (Satin) - Perfectly fine for everyday road use - High Quality with a Satin (Matt-Like) Finish  

Read more less

Bespoke Custom Design Mudflaps to fit:Ford Focus MK4 ST & ST-LineDesigned and made to order here in the UK by us 'The rallyflapZ Team' *ShortieZ* - Protection without the full Rally Look! ShortieZ are our latest design, They do not stick out / hang as low as our rallyflapZ Version Mudflaps! Designed for looks & protection Only the Best Materials used Easy Installation Long Lasting Exceptional Flexibility Impact Resistance   WHICH VERSION DO I NEED?VERSION 1: For models that-have the black plastic strip on the edge of the front wheel arch - without this there  is nowhere for the mudflaps to fix to.-does not have side parking sensors   VERSION2:For models that-has the black plastic strip on the edge of the front wheel arch - without this there  is nowhere for the mudflaps to fix to.-Has side parking sensors as pictured below:   THIS MUST BE CHECKED BEFORE PURCHASE! Ford Focus MK4 ST & ST-Line - KIT INCLUDES:Front Fixing Kit Contents:2 x Front Mud FlapsAll Fixings RequiredRear Fixing Kit Contents:2 x Rear Mud Flaps2 x Rear Laser Cut Stainless Steel BracketsAll Fixings required Avoid expensive re-sprays and get some protection now against Road Grit, Mud, Dirt & GreaseOur rallyflapZ / ShortieZ offer outstanding durability when compared to conventional OEM hard plastic or moulded Mudflaps, You can be assured that with our rallyflapZ come peace of mind that they can be exposed to the harshest weather conditions without any danger of corrosion.  MATERIALS 4mm Thick PVC (Gloss) - Perfectly fine for everyday road use - High Quality with a Gloss Finish 4mm Thick PVC (Satin) - Perfectly fine for everyday road use - High Quality with a Satin (Matt-Like) Finish   LOGO'SOur Logo's are a High quality vinyl material which is applied once the Mud Flaps have been cut to shape and sanded.The Vinyl is long lasting once applied to the mud flap material - however in the event of peeling or damage to them - we offer a life time guarantee on them!

Read more less

Bespoke Custom Design Mudflaps to fit:VW Golf Mk7, Mk7.5 R, GTI, GTDDesigned and made to order here in the UK by us 'The rallyflapZ Team' *ShortieZ* - Protection without the full Rally Look! ShortieZ are our latest design, They do not stick out / hang as low as our rallyflapZ Version Mudflaps! Designed for Looks & Protection Only the Best Materials used Easy Installation Long Lasting Exceptional Flexibility Impact Resistance VW Golf Mk7, Mk7.5 (all models) KIT INCLUDES:Front Fixing Kit Contents:2 x Front Mud Flaps & BracketsAll Fixings RequiredRear Fixing Kit Contents:2 x Rear Mud Flaps2 x Rear Laser Cut Stainless Steel BracketsAll Fixings required Avoid expensive re-sprays and get some protection now against Road Grit, Mud, Dirt & GreaseOur rallyflapZ / ShortieZ offer outstanding durability when compared to conventional OEM hard plastic or moulded Mudflaps, You can be assured that with our rallyflapZ come peace of mind that they can be exposed to the harshest weather conditions without any danger of corrosion.MATERIALS 4mm Thick PVC (Gloss) - Perfectly fine for everyday road use - High Quality with a Gloss Finish 4mm Thick PVC (Satin) - Perfectly fine for everyday road use - High Quality with a Satin / Matt-like Finish  LOGO'SOur Logo's are a High quality vinyl material which is applied once the Mud Flaps have been cut to shape and sanded.The Vinyl is long lasting once applied to the mud flap material - however in the event of peeling or damage to them - we offer a life time guarantee on them!

Read more less

034Motorsport's Carbon Fiber Fresh Air Duct is now available for the 8V/8S Audi A3/S3/TT/TTS & MkVII Volkswagen Golf/GTI/R! Designed to better route cool, dense air from the front of the car to the airbox. This high-quality carbon fiber piece offers OEM+ fit and finish, and is the perfect match for your X34 MQB Air Intake. Unlike the factory plastic air duct, the 034Motorsport Carbon Fiber Fresh Air Duct provides a smooth, direct path for air to enter the airbox from behind the factory grille. In addition to allowing for more airflow to the factory airbox, the Carbon Fiber MQB Fresh Air Duct also yields a noticeable improvement in induction and turbocharger sounds. Features: High Quality Carbon Fiber Construction OEM+ Fit & Finish Improves Airflow from Front of Vehicle to Airbox Eliminates Factory Plastic Blockoff at Core Support Increases Induction & Turbocharger Sounds Offers Simple, Bolt-In Installation What's Included: 034Motorsport Carbon Fiber Fresh Air Duct Self-Adhesive Coolant Hose Clamps (Set of 2) Installation Instructions: Click Here!

Read more less

034Motorsport is pleased to introduce the P34 Performance Air Intake System for 1.8T / 2.0T EA888 Gen3 MQB Vehicles 034Motorsport’s engineers invested significant effort in developing a comprehensive performance intake solution for Audi/Volkswagen EA888 1.8T/2.0T Gen 3 engines, which provides noticeable gains in horsepower and torque over the factory airbox. Throughout the development process, multiple designs were modeled, prototyped, and tested, to ensure that the P34 Air Intake System delivers measurable performance benefits and excellent fitment. OPTIMIZING AIRFLOW 034Motorsport engineers started by identifying the shortcomings of the factory intake system to determine which components restricted airflow to the turbocharger inlet. While the factory lower airbox and fresh air duct to the core support were more than sufficient for increased power levels, the factory air filter, upper airbox, and turbo inlet tube were deemed too restrictive, even with the factory turbocharger034Motorsport's mechanical engineers scanned the factory engine bay and modeled a one-piece unit to replace the factory intake tube and upper airbox. By eliminating the multiple couplers, transitions, and jagged features in the factory upper airbox and intake tube, 034Motorsport's engineering team was able to drastically reduce turbulence in the intake tract, and virtually eliminate pressure drop in the intake system before the turbo inlet. Multiple iterations were prototyped in plastic using 034Motorsport's in-house FDM 3D printer and thoroughly tested. Ultimately, the best-performing design was a fully-enclosed unit featuring a large-diameter one-piece intake tube with smooth transitions all the way back to the factory turbo inlet. TRUE COLD AIR INTAKE To ensure that the P34 Air Intake System draws in cool, dense air, 034Motorsport engineers opted for an enclosed design to prevent hot air from the engine bay entering the intake tract. By bolting to the factory lower airbox, this approach allows the enclosed high-flow panel filter to breathe fresh, cold air from the factory inlet duct before the radiator. PERFORMANCE AIR FILTERHe 034Motorsport P34 Air Intake System Houses A High-Flow Panel Filter With Double-Layer Pleated Cotton Filtration Medium. This Air Filter Design Offers Increased Flow And Excellent Filtration. OEM+ FIT & FINISH 034Motorsport carefully selected the textured finish of the intake tube and upper airbox heat shield to complement the factory plastic trim and engine covers. The 034Motorsport MQB Audi/Volkswagen 1.8T/2.0T Cold Air Intake System was designed to fit like a factory part, and mates directly to the turbo inlet pipe and factory lower airbox to provide an OEM+ look. DYNO-VERIFIED WHEEL HORSEPOWER & TORQUE GAINS 034Motorsport's engineering and development efforts were validated using our Mustang AWD Dynamometer to ensure that the P34 Cold Air Intake System provided substantial, repeatable increases in horsepower and torque.  Peak Wheel Horsepower & Torque on Stage 1 2015 Volkswagen GTI: Stock Intake: 223 Wheel Horsepower / 285 Wheel Foot-Pounds of Torque P34 Intake: 240 Wheel Horsepower / 297 Wheel Foot-Pounds of Torque Peak Horsepower Gain: 10 WHP @ 6,100 RPM Peak Torque Gain: 12 WTQ @ 3,100 RPM See Dyno Chart PRODUCT FEATURES & DETAILS Features: Developed In-House by 034Motorsport's Engineering Team One-Piece Design with High-Quality Construction OEM+ Fit & Finish Retains Factory Lower Airbox & Inlet Duct Fully-Enclosed Design with Pleated Cotton Panel Air Filter Large-Diameter CFD-Optimized Air Intake Tube Dyno-Proven Horsepower & Torque Gains Increased Engine & Induction Sounds Improved Throttle Response Compatable with SAI Equipped & Non-SAI Equipped Vehicles Simple, Straightforward Installation What's Included: 034Motorsport P34 MQB Air Intake System 034Motorsport High-Flow Panel Air Filter Integrated SAI Adapter Fitting Silicone Turbo Inlet Coupler & Hose Clamps FITS: Shop By Car/Audi/S3 (8V)/Induction Kits Shop By Car/Volkswagen/Golf Mk7/Induction Kits Shop By Car/Skoda/Octavia Mk3 (5E)/Induction Kits Shop By Car/Audi/A3 (8V 12-20)/Induction Kits Shop By Car/Audi/TT Mk3 (8S)/Induction Kits Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Induction Kits

Read more less

The X34 Carbon Fiber Audi MQB Cold Air Intake System for 8V/8S Audi A3/S3/TT/TTS & MkVII Volkswagen Golf/GTI/R equipped with 1.8T/2.0T Gen 3 engines has arrived! Offering dyno-proven peak gains of up to 15 crank horsepower and 12 ft-lbs of torque on a completely stock vehicle, and over 30 crank horsepower and 25 ft-lbs of torque on vehicles equipped with Stage 1/2 Performance Software, the X34 Intake System is the ultimate induction solution for your Audi or Volkswagen.034Motorsport’s engineers thoroughly evaluated the factory airbox design to create a performance replacement that reduces pressure drop in the intake tract, while offering OEM+ fit and finish. The result is this complete one-piece MQB Carbon Fiber Air Intake Upgrade, which offers 100% bolt-on installation without the need for any additional pieces.   FITS: Shop By Car/Audi/S3 (8V)/Induction Kits Shop By Car/Volkswagen/Golf Mk7/Induction Kits Shop By Car/Skoda/Octavia Mk3 (5E)/Induction Kits Shop By Car/Audi/A3 (8V 12-20)/Induction Kits Shop By Car/Audi/TT Mk3 (8S)/Induction Kits Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Induction Kits

Read more less

The X34 Carbon Fiber MQB Open-Top Cold Air Intake System for 8V/8S Audi A3/S3/TT/TTS & MkVII Volkswagen Golf/GTI/R equipped with 1.8T/2.0T Gen 3 engines has arrived! We listened to customer feedback and this open-top design allows more intake tract sounds to be heard at a louder volume. Offering dyno-proven peak gains of up to 15 crank horsepower and 12 ft-lbs of torque on a completely stock vehicle, and over 30 crank horsepower and 25 ft-lbs of torque on vehicles equipped with Stage 1/2 Performance Software, the X34 Intake System is the ultimate induction solution for your Audi or Volkswagen.034Motorsport’s engineers thoroughly evaluated the factory airbox design to create a performance replacement that reduces pressure drop in the intake tract, while offering OEM+ fit and finish. The result is this complete one-piece MQB Carbon Fiber Air Intake Upgrade, which offers 100% bolt-on installation without the need for any additional pieces.What's Included?  034Motorsport Carbon Fiber MQB Open-Top Cold Air Intake System 034Motorsport Double-Layer Pleated Cotton Air Filter Integrated SAI Adapter Fitting Installation Hardware FITS: Shop By Car/Audi/S3 (8V)/Induction Kits Shop By Car/Volkswagen/Golf Mk7/Induction Kits Shop By Car/Skoda/Octavia Mk3 (5E)/Induction Kits Shop By Car/Audi/A3 (8V 12-20)/Induction Kits Shop By Car/Audi/TT Mk3 (8S)/Induction Kits Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Induction Kits

Read more less

Bespoke Custom Design Mudflaps to fit:Fiat 124 Spider & 124 aBarth (2016+)Designed and made to order here in the UK by us 'The rallyflapZ Team'   Designed for Looks & Protection Only the Best Materials used Easy Installation Long Lasting Exceptional Flexibility Impact Resistance FIAT ABARTH SPIDER(16+) KIT INCLUDES:Front Fixing Kit Contents:2 x Front Mudflaps8 x Long Black Fixing Plugs (8.3mm x 29mm)8 x Large Rubber Washers (25mm x 2.5mm)2 x 18mm Rubbers Washers2 x Stainless Steel Self tapping Screws (4.8 x 16mm)Rear Fixing Kit Contents:2 x Rear Mudflaps14 x Black plastic Fixing Plugs14 x Large Rubber Washers (25mm x 2.5mm)(The plugs provided are very strong and are difficult to remove once inserted)Avoid expensive re-sprays and get some protection now against Road Grit, Mud, Dirt & GreaseOur rallyflapZ offer outstanding durability when compared to conventional OEM hard plastic or moulded Mudflaps, You can be assured that with our rallyflapZ come peace of mind that they can be exposed to the harshest weather conditions without any danger of corrosion.MATERIALSWe offer two different Mudflap materials - PVC and KAYLAN PU (Polyurethane):Our PVC Mud Flap material is 4mm Thick and is perfect for normal, every day road use.We also offer a KAYLAN PU (Polyurethane) material - which is the same used by World Rally Teams, based on its capability of withstanding repeated flexing. We have reintroduced our 3.2mm PVC Material to cater for all customer budgets.LOGO'SOur Logo's are a High quality vinyl material which is applied once the Mud Flaps have been cut to shape and sanded.The Vinyl is long lasting once applied to the mud flap material - however in the event of peeling or damage to them - we offer a life time guarantee on them!

Read more less

Replace your Awful Chrome R Line badges (Or add to cars without) with our full 4D Replacement Made from Premium 3mm Acrylic (6mm total with 2 colours) these come with 3M Tape already applied to stick straight on in place of your existing badges on your boot lid! Using the latest in Laser technology, these badges are cut with a smooth edge for a perfect finish! And using 3M's best Out door tape, which gets stronger in adverse weather conditions guaranteeing you will never lose them! Create your own look, with ANY colour Backing (Black on our badge) and Front (White on our badge) to give you a truly Unique experience! The price shown is for 1 Badge (105mm x 38mm) This is NOT a Gel Inlay - Your OEM Badge will need to be removed

Read more less

Replace your Awful Chrome and Red ST badges with our full 4D Replacement's Made from Premium 3mm Acrylic (6mm total with 2 colours) these come with 3M Tape already applied to stick straight on in place of your existing badges! Using the latest in Laser technology, these badges are cut with a smooth edge for a perfect finish! And using 3M's best Out door tape, which gets stronger in adverse weather conditions guaranteeing you will never lose them! Create your own look, with ANY colour Backing and Front to give you a truly Unique experience! The price shown is for 1 Pair (1 Front Small and 1 Rear Large) This is NOT a Gel Inlay - Your OEM Badges will need to be removed

Read more less

Bespoke Custom Design Mudflaps to fit:Fiat 500s (2014+)Designed and made to order here in the UK by us 'The rallyflapZ Team'   Designed for Looks & Protection Only the Best Materials used Easy Installation Long Lasting Exceptional Flexibility Impact Resistance FIAT 500s (14+) KIT INCLUDES:Front Fixing Kit Contents:2 x Front Mudflaps2 x 7mm Spacers2 x Extra Long plastic Fixing Plugs10 x Black Plastic 6.3mm Plugs10 x Stainless Steel Self Tapping Screws (to replace plugs if required)Rear Fixing Kit Contents:2 x Rear Mudflaps2 x 37mm Stainless Steel Bracket (C Shaped)10 x Plastic 6.3mm Plugs2 x Large Washers2 x 15mm Spacers1 x 10mm Spacer1 x 5mm Spacer2 x 7mm Spacers4 x Stainless Steel Self Tapping Screws10 x Extra Long Black plastic Fixing Plugs2 x Pieces of Red Glue adhesive tape 3" Long2 x Alcohol Wipes(The plugs provided are very strong and are difficult to remove once inserted)Avoid expensive re-sprays and get some protection now against Road Grit, Mud, Dirt & GreaseOur rallyflapZ offer outstanding durability when compared to conventional OEM hard plastic or moulded Mudflaps, You can be assured that with our rallyflapZ come peace of mind that they can be exposed to the harshest weather conditions without any danger of corrosion.MATERIALSWe offer two different Mudflap materials - PVC and KAYLAN PU (Polyurethane):Our PVC Mud Flap material is 4mm Thick and is perfect for normal, every day road use.We also offer a KAYLAN PU (Polyurethane) material - which is the same used by World Rally Teams, based on its capability of withstanding repeated flexing.LOGO'SOur Logo's are a High quality vinyl material which is applied once the Mud Flaps have been cut to shape and sanded.The Vinyl is long lasting once applied to the mud flap material - however in the event of peeling or damage to them - we offer a life time guarantee on them!

Read more less

This product is for Full Kits with a 501 boot product option, where the customer can choose this item as part of their kit!

Read more less

This product is for Full Kits with a 581 product option, where the customer can choose this item as part of their kit!

Read more less

This product is for Full Kits with a 955 product option, where the customer can choose this item as part of their kit!

Read more less

Here we give you the brand new wide mouth (or snorkel, as it can be known) for the MK3 focus - Facelift Models This is a straight fit with the removal of the bumper and is held on with 2 bolts! The snorkels are 3D Printed, and pressure tested prior to dispatch to ensure they are strong enough to handle all that is thrown at them! The snorkel is only available in black, However the mouth piece is available in a selection of colours! Technical Info: Max Flow - More speed = more air Prevents hot air being sucked in from the radiator Perfect finish and fit every time available in a multitude of colours Please Note: Whilst we will try and keep on top of stock we advise a 10-14 day delay on all orders, as if this needs to be made they take around 23 hours to print, then the testing to be carried out! Busy periods may be longer 

Read more less

The brand new Big Aero wing from Airtec Motorsport is here!   Designed with the help of CEUK based on our MK7 RT330 Track car we are proud to be the first stockist of this amazing item AIRTEC Motorsport Rear Wing for Mk7 Fiesta The kit attaches to the car using our bespoke AIRTEC Motorsport designed brackets, that is bolted to the boot lid. Please note, this requires drilling to your boot lid and should be done by a competent professional. Key features: • Designed and developed in the UK • Tested on track and road with our own Time Attack car • Bespoke laser-cut and powder coated alloy brackets • Unique alloy end plates available in three powder coated colours • High-quality fibreglass centre blade section finished in satin black • Comprehensive fitting kit with all fixtures, fittings, instructions and drilling template Available in a choice of coloured end plates: Gloss Black Race Red Frozen White AIRTEC part no: ATMSFO10 Please note: We endeavour to deliver an extremely high quality product but due to the handmade manufacturing process there is the possibility of minor imperfection(s) on the centre wing blade

Read more less

  Currently made to order, please allow 2-3 weeks before dispatch. Suitable for Ford Focus Mk3 RS with standard front bumpers. **IMPORTANT** Unpainted, comes finished in white or black coating. We HIGHLY recommend these items are fitted by a reputable body shop. Due to the moulding process and hand finishing of GRP parts, there may be some extra surface preparation on some of the items. Please ensure that your body shop has allowed for any extra preparation, tweaking and adjustments often required on GRP parts for a perfect fit before painting. It is important to trial fit all parts before preparation and painting. Once items have been prepared, primed, painted or modified in any way we cannot accept return of any unwanted items. Not all body shops are specialists in fitting GRP body kits and accessories, please ensure they quote accordingly to include any surface prep needed.  As fitted to our Mk3 RS Demo car. Registered Design Right number 6012612

Read more less